The SELECT ANTIFREEZE INHIBITOR STICKS also contain minimal corrosion and scale inhibitors to protect steel in industrial coolant and heat transfer systems. This product should not be considered as an alternative treatment method for corrosion and/or scale in oil and gas producing systems. SELECT CORROSION INHIBITOR or SELECT ANTIFREEZE INHIBITOR STICKS should and can be used in conjunction with the SELECT ANTIFREEZE INHIBITOR STICK. The SELECT ANTIFREEZE INHIBITOR STICK can be very effective in reducing ice blockage in gas pipelines where there are orifice plates, chokes and velocity changes by reducing the freeze point of the water within the system.
In order to be effective the SELECT ANTIFREEZE INHIBITOR STICK should be used regularly two or three times per week. In most gas producing wells 1-2 sticks per treatment should be sufficient. Treatment can be increased for larger water volume situations.
If SELECT ANTIFREEZE INHIBITOR STICKS are used in conjunction with SOAP STICKS- we suggest using the SELECT ANTIFREEZE INHIBITOR STICK on days or times when not using SOAP STICKS to get the maximum benefit from the SELECT ANTIFREEZE INHIBITOR STICK.
The stick will normally dissolve in 20 to 80 minutes depending on temperature and relative water/gas motion. Sticks are 100% soluble in water. Stick melting point is around 128 degrees Fahrenheit.
|￼SENIOR (1 5/8” X 18”)||24/case||N/A||18 42/chest|
|JUNIOR (1 1⁄4” X 15” )||36/case||45/pail||72/chest|
|MIDGET(0-3/4” x 15”)||108/case||204/pail||216/chest|
As with all industrial chemicals, contact with eyes or skin should be avoided (see MSDS). Wash thoroughly with water. Sticks should be stored in a cool dry place.
Always remove stick from plastic bag or split cardboard tube before using. Bag or cardboard tubes can be used as a glove to avoid contact.
DISCLAIMER OF LIABILITY
The information in this bulletin is believed to be accurate, however all recommendations are made without warranty since the conditions of use are beyond Select Industries, Inc. control. Select Industries, Inc. disclaims any liability in connection with the use of the information, and does not warrant against infringement by reason of the use of any of its’ products in combination with any other material or in any process