Select Industries - Soap Sticks

Corrosion Inhibitor Stick Type B are water-soluble/ dispersible sticks designed to release corrosion inhibitor and control corrosion from various sources. Corrosion Inhibitor Stick Type B contain Amine Salt in stick form.

Corrosion Inhibitor Stick Type B are primarily used to control corrosion in water injection systems (tanks, wells, and lines) and down hole applications. Corrosion Inhibitor Stick Type B can be used to treat certain hard-to-reach areas in water injection systems. Dead areas such as in the rat-hole, annulus space above the packer, and the bottom of the water supply tanks may be reached and more easily treated with Corrosion Inhibitor Stick Type B. Corrosion Inhibitor Stick Type B can be used to control corrosion in oil wells, gas wells and cooling towers.

The number of Corrosion Inhibitor Stick Type B required is based on the volume of water to be treated. The best results are achieved by using a larger initial slug treatment (400 PPM daily) until the problem is under control. Then, reduce to smaller periodic treatments (200 PPM daily) thereafter. EXAMPLE: An initial slug treatment of 400 PPM would require approximately 3.2 lbs of Corrosion Inhibitor Stick Type B per 24 BBL (1000 gallons) of water to be treated.

Please review SDS prior to using this product. As with all industrial chemicals, contact with eyes or skin should be avoided. Wash thoroughly with water if contact with skin is made. Sticks should be stored in a cool dry place. Always remove stick from plastic bag or cardboard tube before using. Bag or tube can be used as a glove to avoid contact with hands.