Hydrogen Sulfide Stick SHS-35

Product Information

The SHS-35 H2S SCAVENGER STICK consists of a water soluble hard stick containing the organic hydrogen sulfide scavenger. The stick dissolves easily in water and has a melting point of about 120ºF. The SHS-35 STICK scavenges through the water phase in the well production; therefore, some water needs to be present in the well production for the stick to effectively scavenge hydrogen sulfide.

PRODUCT USES

Multiply: H2S PPM x MMCF x .0243 x 125 = lbs. of stick required

EXAMPLE TREATMENT

2 PPM H2S x .04 (40,000 CU. ft/day) x .0243 x 125 = 2.43 lbs. of sticks required

The efficiency of the SHS-35 STICK depends on many factors such as pressure, temperature, mass transfer, contact time and the quantity of water present in the production. The SHS-35 STICK rapidly complexes with hydrogen sulfide to produce a water soluble and dispersible by-product that helps minimize solids deposition on system equipment. Used and spent SHS-35 is considered to be non-hazardous and can be injected into disposal wells. SHS-35 STICKS contain an organic formaldehyde free hydrogen sulfide scavenger concentrate.

STICK SIZE

1 ¼” X 16”

Read and observe MSDS sheets for this product and follow all safety rules and regulations.

DISCLAIMER OF LIABILITY

The information in this bulletin is believed to be accurate, however all recommendations are made without warranty since the conditions of use are beyond Select Industries, Inc. control. Select Industries, Inc. disclaims any liability in connection with the use of the information, and does not warrant against infringement by reason of the use of any of its’ products in combination with any other material or in any process.

Request Product Info